Hammer Crusher

Hammer Crusher

Applications: It is widely used in fine dressing medium hardness materials in mineral processing plants, refractory materials plants, cement plants, glass factories, electric power, metallurgy and other industrial sectors. It can be used for dry and wet crushing.



Input Size: ≤250 mm

Brief Introduction

Hammer crusher can be divided into single rotor (single-axis) and dual-rotor (two-shaft). The single rotor can be divided into two types: irreversible and reversible. According to the number of rows of hammers, it can be divided into single row and multi row. The hammer crusher can be used not only for stone production lines, sand production lines, but also for cone crushers in beneficiation lines.


  • 1.Wear-resistant hammer head, easy to install

    The working hammer in the machine is cast by new technology and is wear-resistant and impact resistant. The hammer head is easy to install, when the hammer head is damaged and replaced, only the starting cover can drop the hammer head to the side. Less work is needed for maintenance and repair.

  • 2.Sealed structure, safe and environmentally friendly

    Continuous optimization of the production process and technology, the use of sealed structure, one-time feeding and crushing molding, with large output, high efficiency, low power, energy saving and environmental protection.

  • 3.Self-regulation of discharge granularity

    Users can independently adjust the discharge granularity according to their own needs. The coarse, medium, fine and various specifications are complete, and the finished product has uniform and clear grain size, which saves the user the cost of material crushing.

Working Principle

The hammer crusher mainly relies on the impact energy to complete the crushing material operation. The material enters the crusher and is broken by the impact of the high-speed rotary hammer. The broken material obtains kinetic energy from the hammer head, and rushes toward the baffle and sieve bar in the frame at high speed, at the same time, the materials collide with each other and are broken several times, the material smaller than the gap between the screens is discharged from the gap. The individual larger materials are again crushed by the impact, grinding and extrusion of the hammer on the sieve bar, and the material is extruded from the gap by the hammer to obtain the product of the desired particle size.


Model Input size(mm) Output size(mm) Capacity(t/h) Power(kw) Weight(kg)
PC400×300 ≤100 ≤10 5-10 11 800
PC600×400 ≤120 ≤15 10-25 18.5 1500
PC800×600 ≤120 ≤15 20-35 55 3100
PC1000×800 ≤200 ≤13 20-40 115 7900
PC1000×1000 ≤200 ≤15 30-80 132 8650
PCX1300×1200 ≤250 ≤19 80-200 240 13600